公海堵船710官方网站-威尼斯vns12561

Home > Products > Bearing Bush > Steam Turbine Bearing Bush

  • Steam Turbine Bearing Bush


  • Steam Turbine Bearing Bush

  • Radial bearing bush

    Radial bearing bush can also be called "support bearing", which is applied to the support point position of the shafting. It is usually used by 2-4 sets of bushes, bearing all the weight of the shafting. During operation, the lubricating oil film is formed between the shaft and the supporting surface through oil supply, thus avoiding dry friction and prolonging service life.
  • Tilting bush

    It is usually used in the 1 # and 2 # bearing bush position of steam turbine high and medium pressure cylinder shafting, through self-aligning to achieve the purpose of stabilizing the shafting center, so that the shafting can run steadily.

  • Thrust bearing bush

    It is applied to the head part of shafting machine to limit the axial displacement caused by various reasons through reasonable clearance.
  • Radial thrust bearing bush

    It is usually applied to units with small installed capacity at 200 MW. The bearing bush has a compact structure and combines radial and thrust bearing bushes with one body, but the form is complicated and maintenance is difficult.

?

公海堵船710官方网站|威尼斯vns12561

XML 地图 | Sitemap 地图